EasyManua.ls Logo

Snapper 1600 Series - Troubleshooting, Adjustment, & Service

Snapper 1600 Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
Regular Maintenance
Figure 29. Transmission ID Tag Location
A. ID Tag
Transmission Maintenance
K57 Maintenance
The K57 is a sealed unit and does not require regular
maintenance. If the transmission lacks drive or is
excessive noisy, it may need to be purged. See your
Dealer for this procedure.
Do not allow dirt, water, or other debris to
enter the expansion chamber or
transmission. Even a small amount of dirt
can damage the transmission
Transmission Identification
Several service procedures within this book are identified
by, and vary by, transmission type. To determine what
transmission is in your tractor, check the identification
tag attached to the axle of the transmission (Figure 29),
or check your tractor’s parts book.
A

Table of Contents

Other manuals for Snapper 1600 Series

Related product manuals