Snapper 422023BVE - Page 41

42" MOWER DECK ASSEMBLY PT.1
Footnotes:
TP 400-5020-4-RE-N
Manual No. 7006154REAR ENGINE RIDER
SERIES 23
41
Part No Descri
p
tionItem Qt
y
Note
1 7063040 1 WELDMENT, 42” Deck Was 42645
2 7051401 1 ASSEMBLY, Side Chute (Includes decal 26831)
3 7059628 2 ASSEMBLY, Spindle
4 7026691 2 BLADE, 21” Standard Lift
5 7014168 1 SPRNG, Blade Handle
6 7012055 1 ROD, Idler Control
7 7038021 1 MOUNT, Handle/Switch
8 7046874 1 GRIP, Handle
9 7053034 2 ASSEMBLY, Spindle Ring
10 7029264 4 WHEEL, Gage
11 7035835 4 POST, Anti-Scalp
12 7029265 4 BOLT, Gage Wheel, 3/8-16 x 3-3/8” Hex Head Shoulder
13 7014852 1 DECAL, Caution
14 7013010 1 DECAL, Danger Was 26831
15 7091619 6 NUT, 3/8-16 Hex Flange Lock Was 90613
16 7091508 4 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR5
17 7029303 2 STAND-OFF, 3-1/2” long, 5/16-18 top, 3/8-16 bottom threads
18 7091619 6 NUT, 3/8-16 Hex Flange Lock Was 90613
19 7059254 1 WELDMENT, Blade Engagement Handle
20 7090299 1 SCREW, #10-32 x 1” Hex Washer Head Self-Tap
21 7018524 1 SWITCH, Deck Interlock (NO)
22 7091294 1 WASHER, 1/4” Flat Was 90055
23 7091597 1 PIN, 3/32 x 3/4” Cotter Was 90037
24 7012063 4 WASHER, 13/32” I.D. Cone
25 7090824 1 SCREW, 3/8-24 x 1-1/4” Hex Head Cap, GR5
26 7012670 2 TOLERANCE RING, 2.0
27 7014526 2 SPACER
28 7011791 2 RETAINER, 5/16” Bolt
29 7091537 2 WING-NUT, 5/16-18 Lock
30 7090188 2 WASHER, 5/16” Flat Was 91296
31 7091585 4 NUT, 3/8-16 Hex Center Lock
32 7091049 4 WING-NUT, 3/8-16 Nyloc
33 7091328 4 SCREW, 3/8-16 x 1-1/4” Hex Head Cap, GR5
34 7046567 1 HANDLE, Blade Engagement
35 7091974 1 PIN, 3/16 x 1” Clevis
36 7046648 1 SPRING, Torsion
37 7091597 1 PIN, 3/32 x 1/2” Cotter Was 90555