31
WARNING: To avoid serious injury, operate your unit across
the face of slopes, never up and down the face. Do not operate
on slopes greater than 10 degrees. Make turns gradually to
prevent tipping or loss of control. Exercise extreme caution
when changing direction on slopes.
1. Fold this page along dotted line indicated above.
2. Hold page before you so that its left edge is vertically parallel to a tree
trunk or other upright structure.
3. Sight across the fold in the direction of slope you want to measure.
4. Compare the angle of the fold with the slope. If the slope is greater
than 10 degrees, do not mow.
ONLY MOW ACROSS SLOPE,
NOT UP AND DOWN SLOPE
F
O
L
D
A
LON
G
D
OT
TED LI
N
E
THIS IS A
10 DEGREE SLOPE
10 DEGREES MAX.
GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION
Slope Guide
en
GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION
WARNING: To avoid serious injury, operate your unit across
the face of slopes, never up and down the face. Do not oper-
ate on slopes greater than 10 degrees. Make turns gradually
to prevent tipping or loss of control. Exercise extreme caution
when changing direction on slopes.
ONLY MOW ACROSS SLOPE,
NOT UP AND DOWN SLOPE
10 DEGREES MAX.
FOLD ALONG DOTTED LINE
THIS IS A 10 DEGREE SLOPE
1. Fold this page along dotted line indicated above.
2. Hold page before you so that its left edge is vertically parallel to a
tree trunk or other upright structure.
3. Sight across the fold in the direction of slope you want to measure.
4. Compare the angle of the fold with the slope. If the slope is greater
than 10 degrees, do not mow
To Next Page
Loading...
Need help?
General
