Snapper L1226E - Features & Controls; Control Locations Overview

Engine Group
Footnotes:
TP 400-5286-IR-LF-N
Manual No. 7006185LARGE FRAME TWO STAGE
2008 MODELS
15
Part No Descri
p
tionItem Qt
y
Note
1 -- 1 * ENGINE, 8.5HP B&S Mod. #15C1140112E1
1 -- 1 * ENGINE, 9.5HP B&S Mod. #20A4140117E1
1 -- 1 * ENGINE, 10.5HP B&S Mod. #20E2140118E1
1 -- 1 * ENGINE, 11.5HP B&S Mod. #21C2140132E1
1 -- 1 * ENGINE, 8.5HP B&S Mod. #15C1140111E1 (CE/Export)
1 -- 1 * ENGINE, 9.5HP B&S Mod. #20A4140119E1 (CE/Export)
1 -- 1 * ENGINE, 10.5HP B&S Mod. #20E2140113E1 (CE/Export)
1 -- 1 * ENGINE, 11.5HP B&S Mod. #21C2140115E1 (CE/Export)
2 1724064 1 CORD, Electric Start (Used on Domestic Models)
3 1734698 1 GUARD, Muffler (Used on Domestic Models)
3 1734732 1 GUARD, Muffler (Used on Domestic 8.5HP
Models)
4 1929477 3 SCREW, Hex Washer Head Taptite
5 720064 4 CARRIAGE BOLT, 5/16-18 x 1-1/2
6 720376 4 NUT, Speed
7 2831277 1 NUT, Hex Flange 5/16-18 Whiz Lock
7 1960686 3 NUT, Hex Flange 5/16-18 ESNA
8 722085 1 PULLEY, Engine
9 1922755 2 WASHER, 3/8
9 1919381 2 WASHER, 5/16-1 (Used on 8.5HP Models)
10 1916965 1 LOCKWASHER, Spring 3/8
11 1960428 1 CAPSCREW, Hex Head 3/8-24 x 1-1/4 G8
11 1921982 1 CAPSCREW, Hex Head 3/16-24 x 1-1/4 G8 (Used on 8.5HP Models)
12 1733324 1 V-BELT, 3L 33.13, Drive
13 1733507 1 V-BELT, 4L 38.50, Auger (Used on 10.5 - 11.5 HP Models)
13 1733051 1 V-BELT, 4L 36.50, Auger (Used on 8.5 - 9.5 HP Models)
14 1733014 1 STOP, Belt
15 1917356 3/4 LOCKWASHER, Spring 5/16
16 1921515 2 CAPSCREW, Hex Head 5/16-24 x 3/4 G5
17 722090 1 IDLER BRACKET ASSEMBLY, Drive Belt
18 722072 1 BUSHING, Idler Bracket
19 724418 1 SPRING, Extension Idler
20 722378 2 IDLER, Plastic Ball Bearing
21 1960251 2 NUT, Hex Centerlock Jam 3/8-16
22 724823 1 CARRIAGE BOLT, 3/8-16 x 1-1/4
23 722132 1 IDLER, Auger (Used on 10.5 - 11.5 HP Models)
23 1733055 1 IDLER, Auger (Used on 8.5 - 9.5 HP Models)
24 722118 1 SPACER/AUGER BRACKET
Note* See your local Briggs & Strattion Distributor for Parts & Service.