Snapper L1226E Parts Manual

Wheel & Tire Group
Footnotes:
TP 400-5286-IR-LF-N
Manual No. 7006185LARGE FRAME TWO STAGE
2008 MODELS
25
Part No Descri
p
tionItem Qt
y
Note
1 1731186 2 PIN, Klik .313 x 1.97 (Used on 26” Models)
1 1679697 2 PIN, Klik 1/4 x 1-3/4 (Used on 28”, 30” & 32” Models)
2 1732935 1 WHEEL & TIRE ASSEMBLY, 15 x 5 L.H & R.H. (Used on 26” Models)
2 1723169 1 WHEEL & TIRE ASSEMBLY, 15 x 5 L.H. (Used on 28” Models)
2 1714235 1 WHEEL & TIRE ASSEMBLY, 16 x 4.8 L.H. (Used on 30” & 32” Models)
3 1732935 1 WHEEL & TIRE ASSEMBLY, 15 x 5 L.H & R.H. (Used on 26” Models)
3 1733089 1 WHEEL & TIRE ASSEMBLY, 15 x 5 R.H. (Used on 28” Models)
3 1720306 1 WHEEL & TIRE ASSEMBLY, 16 x 4.8 R.H. (Used on 30” & 32” Models)
4 1664090 1 TUBE, Tire 4.10/3.50-6 L.H. (Used on 28” Models)
4 2153038 1 TUBE, Tire 4.80/4.00 L.H. & R.H. (Used on 30” & 32” Models)
5 1723287 1 TIRE, 15 x 5.00-6, 2 PLY, KENDA L.H. (Used on 28” Models)
5 1612000 1 TIRE, 4.80/4.00-8 L.H. & R.H. (Used on 30” & 32” Models)
6 1657528 2 RETAINING RING, Extension, #75 3/4 Self Lock (Used on 26” Models)
7 2172353 1 VALVE STEM & CAP (Used on All Models)
8 725394 2 WASHER, Flat (Used on 26” Models)
9 1723286 1 HUB, Wheel L.H. (Used on 28” Models)
9 1714242 1 HUB, Wheel 3.756 Wide 8. L.H. (Used on 30” & 32” Models)
9 1720307 1 HUB, Wheel 3.75 Wide 8. R.H. (Used on 30” & 32” Models)

Snapper L1226E Specifications

General

Brand	Snapper
Model	L1226E
Category	Snow Blower
Language	English