Snapper LT120G30DB User Manual

OPERATING INSTRUCTIONS
STARTING & STOPPING MOWER BLADE
STARTING MOWER BLADE
Start engine.
Raise blade engagement lever to "ON". See Figure 12.
STOPPING MOWER BLADE
Move blade engagement lever to "OFF". See Figure 12.
SETTING & RELEASING PARK BRAKE
SETTING PARK BRAKE
Fully depress clutch/brake pedal.
Move park brake lever up into slot. See Figure 13.
Release clutch/brake pedal.
RELEASING PARK BRAKE
Fully depress clutch/brake pedal. The park brake lever
will release automatically.
FIGURE 13
ROLLING TRACTOR WITH ENGINE OFF
ROLLING HYDRO MODELS
With engine "OFF", move to rear of tractor.
Move the roll release control to the right and down. This
disengages the hydro transmission. See Figure 14.
Move tractor to desired location.
Move roll release control up and to the left to engage hydro
transmission
Set park brake.
NOTE:
The transmission will not propel the tractor if it is left in the
"ROLL" position.
FIGURE 14
9

Snapper LT120G30DB Specifications

General

Brand	Snapper
Model	LT120G30DB
Category	Lawn Mower
Language	English