Snapper MR216015B

SERVICE SCHEDULE
ITEM
Engine Oil
SERVICE PERFORMED REF.
Check Oil Level Page 6
EACH 5 25
USE HRS HRS
X
50
HR8
100
HR8
Initial Oil Change Page 9
X
Periodic Oil Change Page 10
X*
Air Pre-Cleaner Clean Sponge Element
Air Cleaner Clean or Replace
Engine Manual
& Page 10.
Engine Manual.
Spark Plug Replace Engine Manual.
X
Engine Cooling Clean Shroud & Fins Engine Manual
System
Drive Belts Check For Wear And Page 16
Tension
Mower Blade Check For Wear, Damage Page 11-12
& Replacement
Mower Deck Clean Debris Page 10
Accumulation
Transmission Check Grease Level Pages 9
Grease
X
X
X
X
X
Periodic Grease Check Pages 10
X**
Drive Disc Check for Wear Damage Page 12-15
& Replacement
* Change oil every 25 hours when operating under heavy load or high temperatures.
**Clean more often under dusty conditions or when air debris is present
X
4.5 MAINTENANCE/REPLACEM ENT PARTS
MAINTENANCE PARTS
Blade Control Cable (MRP216515BV)
Blade Control Cable IMR216015TI
Clutch Pull Cable (Propelled Models)
Cutter Blade IMulchin_ll
Cutter Blade (Ninja - Quad Edge)
Wheel Drive Pulley to Transmission Pulley Belt
* Engine to Drive Disc Stretch Type Belt
Rubber Drive Tire
Parts Manual for 21" Steel Deck Walk Behind Mower
"M" Series 14 & 15
7-2933
4-1971
7-2932
4-1939
2-6407
1-2354
4-6784
4-1855
06064
* IMPORTANT: This stretch belt should be used only on models without idler pulleys.
EACH
SEASON
X
X
X
19