Tiller Head
Footnotes:
TP 400-5202-5-RT-N
Manual No. 7006033LARGE FRAME REAR TINE TILLERS
SERIES 2
35
Part No Descri
tionItem Qt
Note
35 7090222 NUT, 5/16-24 Hex Center Lock
36 7014340 IDLER, Flat 2.5" OD .375" ID
37 7032246 ARM, idler
38 7090861 BOLT, 5/16-18 x 1-3/4" Carriage (Gr.5)
39 7035062 PLATE, Left Side
40 7090731 10 BOLT, 5/16-18 x 1/2" Short Neck Carriage (Gr.5)
41 7014668 SPRING
42 7047856 COVER, Belt
43 7091575 2 NUT, 5/16-18 Hex Lock Was 90184
44 7014980 2 WASHER, Seal
45 7091537 NUT, 5/16-18 Lock Wing Was 90375
46 7011791 10 RETAINER, Bolt 5/16"
47 7014353 V-BELT, 4 L x 62.38" Effective Length
48 7090118 3 WASHER, 3/8 Split Lock
49 7040490 PIN, Clevis 3/4 x 6.062 (8HP)
* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)
To Next Page
Loading...
