Garden Tool Accessories (P/N 60731 Hiller Furrower Kit)
Footnotes:
TP 400-5202-5-RT-N
Manual No. 7006033LARGE FRAME REAR TINE TILLERS
SERIES 2
51
Part No Descri
tionItem Qt
Note
7060731 Hiller Furrower Kit
1 7047857 BRACKET, Clevis Included in Hiller/Furrower Kit
(P/N 6-0628)
2 7047858 DRAW-BAR Included in Hiller/Furrower Kit
(P/N 6-0628)
3 7047885 STANDARD Included in Hiller/Furrower Kit
(P/N 6-0628)
4 7032430 SKID-SHOE Included in Hiller/Furrower Kit
(P/N 6-0628)
5 7035072 HILLER - FORROWER Included in Hiller/Furrower Kit
(P/N 6-0628)
6 7036135 WING, Hiller (Left Side) Included in Hiller/Furrower Kit
(P/N 6-0628)
7 7036134 WING, Hiller (Right Side) Was 38134, Included in
Hiller/Furrower Kit (P/N 6-0628)
8 7090779 BOLT, 1/2-13 x 3 1/2" Carriage, Grade 2
9 7090705 WASHER, 1/2' Flat
10 7091316 NUT, 1/2-13 Hex Was 90258
11 7090316 4 BOLT, 5/16-18 x 3/4" Carriage
12 7090188 8 WASHER, 5/16" Flat
13 7091537 4 WING-NUT, 5/16-18 Was 90492
14 7091596 3 PIN, .148 x 2 5/8" Hair Was 13844
15 7013111 3 PIN, 1/2 x 1" Clevis
16 7091540 2 BOLT, 5/16-18 x 1 1/2" Hex Head Was 90211
17 7091511 2 NUT, 5/16-18 Hex Was 90196
18 7090187 2 WASHER, 5/16 Split Lock
19 7040527 BRACKET, Mounting (Front Tine Tiller Only!)
20 7013460 PIN, 3/8 x 1 1/2" Clevis (Front Tine Tiller Only!)
21 7038217 CLEVIS, Support
22 7090134 2 SCREW, 3/8-16 x 3/4" Hex Head Cap
23 7090122 8 WASHER, 3/8" Flat
24 7090118 2 WASHER, 3/8 Split Lock
25 7091302 6 NUT, 3/8-16 Hex Was 90130
To Next Page
Loading...
