Footnotes:
Manual No.
700647721"STEEL DECK WALK BEHIND MOWERS
SERIES 20
7
Handles and Controls
NOTE: * Part number and revision is stamped on cable.
Part No Descri
tionItem Qty
38 7075182 1 KNOB, Shift (Red)
39 7091167 1 SCREW, #8-32 x 1/2” Cross Recess Filister Head Machine
40 7091018 1 NUT, #8-32 Hex
41 7028568 1 WASHER, Belleville
42 7091585 1 NUT, 3/8-16 Hex Center Lock
43 7074133 1 ROD, Speed Control (1/4-28 thread)
44 7090188 2 WASHER, 11/32” Flat
45 7034162 1 COTTER PIN, 5/16 Self Lock
46 7035744 4 KNOB, 5/16-18 Wing (Black) (was 720727)
47 7023154 1 SCREW, #10-32 x 5/8” Self-Tap
48 7091575 1 NUT, 5/16-18 Hex Center Lock (was 7091067)
49 7090238 1 SCREW, 5/16-24 x 1” Hex Head Cap GR 5
50 7090595 3 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR 5
51 7091130 2 WASHER, .33 x .88 x .09 Flat
52 7090538 1 TEENUT, 5/16-18 (or 7090895)
53 7012114 1 BUSHING, Differential, .328 x .625 x .41
54 7013849 1 SPACER, .33 x .63 x .156
55 7091606 1 NUT, 5/16-24 Hex Center Lock GR 5 (was 7091074)
56 7073913 1 BELL CRANK
57 7015753 2 BALL JOINT, 1/4-28
58 7090095 3 NUT, 1/4-28 Hex
59 7091904 1 SCREW, 5/16-18 x 7/8” Hex Head Cap, GR 5
60 7073822 1 BRACKET, Bell Crank
61 7091601 2 NUT, 5/16-18 Hex Flange Lock, GR 5 (was 7090585 or 7091070)
To Next Page
Loading...
Need help?
General
