Snapper ST48 User Manual

ADJUST THE CUTTING SWATH
(See
Figure 6.
)
This trimmer is equipped with a line cut-off blade on the guard. The line cut
off blade continuously trims the line to ensure a consistent and efficient
cut diameter. Advance line whenever you hear the engine running faster

performance and keep line long enough to advance properly.
This trimmer is currently set at the 11 in. cutting swath. To adjust to a cutting
swath of 13 in.:
1. Remove the battery pack.
2. 
3. Tighten the blade screw.
ASSEMBLY
Screw
Cut-off blade
Fig. 6
15

Snapper ST48 Specifications

General

Brand	Snapper
Model	ST48
Category	Trimmer
Language	English