17
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Motor fails to start
when switch trigger is
depressed.
Battery is not secure. To secure the battery pack, make sure
the latches on the top of the battery
pack snap into place.
Battery is not charged. Charge the battery pack according
to the instructions included with your
model.
Motor runs,but cutting
blades do not move.
Hedger damaged. Do not use
hedge trimmer.
Call for technical service.
Hedge trimmer
smokes during
operation.
Hedger damaged. Do not use
hedge trimmer.
Call for technical service.
Motor hums, blades
do not move.
Debris or other may be
jamming the blades.
Remove battery, clear debris blockage
from blades.
To Next Page
Loading...
