OPERATION PROCEDURE
• Select the ice bullet size and
then press the start button.
(The green indicator light will
flash until ice bullet size has
been selected and the start
button has been pushed).
• Let the appliance run a few
cycles to fully calibrate.
• Place the Ice Basket inside the appliance.
• Ensure that the water drain cap is secure with the silicone
grommet inside.
• Fill the water tank with drinkable water only, ensuring that the
water level does not exceed the bottom of the ice basket.
• Connect the appliance to a dedicated power source.
1
2
3
4
5
6
7
8
9
A
B
Select Ice Size
Start Ice Making Cycle
C
D
Stop Ice Making Cycle
Ice Full Indicator
E Water Low
Indicator
Lid
Inner Liner
Ice Basket
Control Panel
Ice Pusher
Ice Full Sensor
Water Drain Cap
Filter
Leveling Feet
STRUCTURE
CONTROL PANEL
06
1
5
6
7
9
2
3
4
A
B
C
D
E
8
To Next Page
Loading...