5. Tap on the Configuration tab. If desired, modify how the CHS confirms a good scan
and/or select a data suffix to automatically add to each instance of scanned data.
For laser versions of the CHS, on the 7P and7NRx support vibrate mode.
6. Tap on the Symbologies tab. If desired, modify which symbologies the CHS will be able
to read.
Enabling all possible symbologies may slow the decoding process.
The RSS symbology is now known as GS1 DataBar.
If you want to read UPC-A symbols, disable the GS1 DataBar option so that GS1
DataBar symbols don’t get mistakenly decoded.
7. Tap ok to exit the Scanner Settings.
CHAPTER 4: SETUP FOR WINDOWS MOBILE 51
To Next Page
Loading...
