12
CHARGING THE SCANNER
The CHS must be fully charged before first use. Use the AC adapter to charge from a
wall outlet. Initial charging takes about 5 hours with an AC adapter. Optional charging
accessories are also available.
The LED will be solid red while charging and green when the batteries are full.
Connecting the USB cable to a PC to charge the CHS is not reliable and not recommended.
Included Charging
Hardware
AC adapter with international plugs
USB A Male to DC Plug Cable (2A maximum)
AC Adapter Rating 5V, 2A, positive pole center
Power Jack Connector 4 mm barrel
Optional Charging
Hardware
Charging cradle
Car charger
Mobile Power Pack (available in Americas/Asia Pac)
AC or DC adapter from Socket SoMo
Purchase online at: http://ww1.socketmobile.com/products/bluetooth-
scanners/accessories-bt.aspx
To Next Page
Loading...
