48
To pair the CHS with a Windows 8 / RT / 7 computer with Microsoft Bluetooth
Stack:
1. Turn on Bluetooth on your computer. Refer to your computer’s documentation for instructions.
2. Right-click on the Bluetooth icon
in the system tray (notification area). In the
pop-up menu, click Add a Device. A device search will begin.
3. In the device list, select Socket CHS [xxxxxx] and click Next.
The characters in brackets are the last six characters of the CHS Bluetooth Address,
which is labeled inside the battery compartment.
4. If prompted, select Enter the device’s pairing code and enter the passkey 0000 (four
zeroes). Click Next.
5. In the last screen, click Close.
To Next Page
Loading...
