50
To pair the CHS with a Windows Vista / XP computer with Microsoft Bluetooth Stack:
1. Turn on Bluetooth on your computer. Refer to your computer’s documentation for instructions.
2. Right-click on the Bluetooth icon in the system tray (notification area). In the pop-up
menu, click Add a Bluetooth Device.
3. In the welcome screen, check the box My device is set up and ready to be found.
Click Next. A device search will begin.
4. In the device list, select Socket CHS [xxxxxx]. Click Next.
The characters in brackets are the last six characters of the CHS Bluetooth Address,
which is labeled inside the battery compartment.
5. If prompted, select Use the passkey found in the documentation and enter the
passkey 0000 (four zeroes). Click Next.
Follow the remaining screens to complete the wizard. In the last screen, click Finish.
The CHS will beep once when it has connected and is ready to scan barcodes.
The LED will also blink blue once every 3 seconds.
To Next Page
Loading...
