52
To pair the CHS with a Windows computer with Broadcom (Widcomm) Bluetooth
Stack:
1. Turn on Bluetooth on your computer. Refer to your computer’s documentation for instructions.
2. Click on the Bluetooth icon
in the system tray (notification area).
3. On the left side, under Bluetooth Tasks, click Add a Bluetooth Device. A device search
will begin.
4. In the device list, select Socket CHS [xxxxxx].
5. If a passkey is requested, enter 0000 (four zeroes). Click Pair Now.
6. If prompted to select a Bluetooth service, select the CHS. Click Finish.
Use Bluetooth v2.1 or later for best results. Do not use Quick Connect | Bluetooth
serial devices when the CHS is in HID mode.
To Next Page
Loading...
