Socket CHS - Status Indicators

STATUS INDICATORS
Status LED Activity Meaning
Bluetooth 1 Blue blink every
second
Bluetooth is On but not
connected.
1 Blue blink every 3
seconds
CHS is connected to
device.
Good Read Green Constant
(while scanning)
Data successfully scanned.
Battery Status Red Blinking
(while scanning and
no AC power)
20% or less battery
capacity remaining.
Red Constant
(while AC power)
Battery is charging.
Off
(while AC power)
Battery is fully charged.
Off
(while no AC power)
CHS is Off.
26
STATUS INDICATORS (CONTINUED)
Beep Pattern Meaning
Low-high tone Power On
High-low tone Power Off
1 low beep Keyboard Pop-up Enable
1 beep CHS connected to device and ready to scan bar-
codes.
1 beep with
Green LED blink
Data successfully scanned.
2 beeps, same
tone
CHS disconnected from device.
1 long beep CHS tried multiple times unsuccessfully to con-
nect to the last device it paired with. After 5
minutes the CHS will power off.
3 beeps with
escalating tone
CHS recognized the Command Barcode and imple-
mented the change.
3 beeps with
escalating tone
followed by a
long tone
CHS recognized the Command Barcode, but could
not implement the change. Verify the Command
Barcode is valid and retry.
27