Socket S700 - Continuous Scanning Options; Scanner Always On; Continuous Power for 8 Hours

Ctrl + S
Scan to Enable WITH BEEP
Scan to Enable NO BEEP
13
CONTINUOUS SCANNING
*These settings drain the battery faster. Please ensure the scanner is charged daily.
For busy days on the job, try using the Active Mode to keep you moving faster. Avoid the hassle of turning
the scanner on again and reconnecting to your host device.
Scan one of the barcodes below and recongure the scanner to remain on longer.
Note: Turn off the host device’s Bluetooth prior to scanning one of the alternate timer barcodes. Then
turn the Bluetooth back on.
Scanner Always On*
Congures the scanner to never power off.
Continuous Power for 8 hours*
Scan Barcode to congure the scanner to remain on for 8 hours.