Socket S700 - UPC;EAN Supplemental Redundancy and AIM ID Format; Supplemental Redundancy Setting; AIM ID Format Control; UPC-A Check Digit Transmission

Socket User Manual (V 1.2) 2017/11/06
20
 Decode UPC/EAN Supplemental Redundancy (50h)
R : 00 00 05 C7 04 00 50 S1 S2
W : 00 00 07 C6 04 00 FF 50 07 S1 S2
Decode UPC/EAN Supplemental Redundancy (default : 07)
Triple Setting , input 2 digits , Range : 02~20.
 UPC/EAN/JAN Supplemental AIM ID Format (F1h A0h)
R : 00 00 06 C7 04 00 F1 A0 S1 S2
W : 00 00 08 C6 04 00 FF F1 A0 00 S1 S2
Separate
W : 00 00 08 C6 04 00 FF F1 A0 01 S1 S2
*Combined
W : 00 00 08 C6 04 00 FF F1 A0 02 S1 S2
Separate Transmissions
 Transmit UPC-A Check Digit (28h)
R : 00 00 05 C7 04 00 28 S1 S2
W : 00 00 07 C6 04 00 FF 28 01 S1 S2
*Transmit UPC-A Check Digit
W : 00 00 07 C6 04 00 FF 28 00 S1 S2
Do Not Transmit UPC-A Check Digit