Socket S700 - Code 128 Length Settings; Code 128 Length Configuration; GS1-128 Symbology Control; GS1-128 Enable;Disable

Socket User Manual (V 1.2) 2017/11/06
25
 Set Length for Code 128 (GS1-128)(D1h & D2h)
One Discrete Length : Length 1 = value , Length 2 = 0.
Two Discrete Lengths : Length 1 > Length 2.
Length Within Range : Length 2 > Length 1.
Any Length : Length 1 = 0, Length 2 = 0.
R : 00 00 05 C7 04 00 D1 S1 S2
R : 00 00 05 C7 04 00 D2 S1 S2
W : 00 00 07 C6 04 00 FF D1 01 S1 S2
Length 1
W : 00 00 07 C6 04 00 FF D2 37 S1 S2
Length 2
Triple Setting , input 2 digits , Range : 00~55.
 Enable/Disable GS1-128 (formerly UCC/EAN-128) (0Eh)
R : 00 00 05 C7 04 00 0E S1 S2
W : 00 00 07 C6 04 00 FF 0E 01 S1 S2
*Enable GS1-128
W : 00 00 07 C6 04 00 FF 0E 00 S1 S2
Disable GS1-128