Beep Pattern Sound Meaning
Low-High Tone Power On
High-Low Tone Power Off
2 Even Tones Power Supply detected and scanner started
charging
1 Low Beep Scanner has toggled on-screen keyboard or
keyboard toggle feature is enabled (iOS devices
only)
1 Beep Scanner connected to device and is ready to scan
barcodes
1 Beep Data successfully scanned
2 Beeps (same
tone)
Scanner disconnected
1 Long Beep Scanner gave up searching for a host
3 Beeps
(escalating tone)
Scanner has been recongured (the command
scanned successfully)
3 Beeps (escalat-
ing tone followed
by long tone)
The command barcode did NOT work! (Verify if the
command barcode used is valid for your scanner
and try again)
25
To Next Page
Loading...
