EasyManua.ls Logo

Socket SocketScan S700 - Battery Handling and Charging Warnings

Socket SocketScan S700
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BATTERY WARNING STATEMENTS
This device contains two AA rechargeable NiMH replaceable batter-
ies.
Stop charging SocketScan barcode scanners if charging isn’t completed
within the normal specied time (approx. 6 hours).
Stop charging the battery if the SocketScan barcode scanner case be-
comes abnormally hot, or shows signs of odor, discoloration, deformation,
or abnormal conditions is detected during use, charge, or storage.
Stop using the SocketScan barcode scanner if the enclosure is cracked,
swollen or shows any other signs of mis-use. Discontinue immediately and
promptly dispose of unit.
Your device contains rechargeable NiMH batteries which may
present a risk of re or chemical burn if mistreated. Do not charge or use
the unit in a car or similar place where the inside temperature may be
over 60 degrees C or 140 degrees F.
Never throw the battery into a re, as that could cause the battery to
explode.
Never short circuit the battery by bringing the terminals in contact
with another metal object. This could cause personal injury, or re,
and could also damage the battery.
Never dispose of used batteries with other ordinary solid wastes.
Batteries contain toxic substances.
36

Related product manuals