Socket SocketScan S700 - Detailed Beep Settings; Detailed Vibrate Settings

Important! Make sure the Scanner is not connected to a host
computer or device before scanning a command barcode!
Beep Settings
Beep after scanner
Decodes Data ON
(default)
Enables scanner to
beep to indicate
successful scans.
#FNB0119E00010003
0078004B#
Beep after scanner
Decodes Data OFF
Disables scanner
from beeping to
indicate successful
scans.
#FNB01190E0001000
00078004B#
43
COMMAND BARCODES (CONTINUED)