Socket SocketScan S700 - Active Mode Bluetooth Settings

46
COMMAND BARCODES (CONTINUED)
For busy days on the job, try using the Active Mode to keep you moving faster.
Avoid the hassle of turning the scanner on again and reconnecting to your host
device.
Scan one of the barcodes below and recongure the scanner to remain on longer.
Note: Turn off the host device’s Bluetooth prior to scanning one of the alternate
timer barcodes. Then turn the Bluetooth back on.
*These settings drain the battery faster. It is assumed you will charge the scan-
ner within a 24-hour period or overnight. If you don’t, the scanner’s battery
will drain completely.
Bluetooth Connection Modes
Scanner Always On*
Congures the scanner to
never power off.
#FNB012100000000#
Continuous Power for 8
hours*
Scan Barcode to congure the
scanner to remain on for 8
hours.
#FNB012101E001E0#