Socket SocketScan - Page 27

27
Convert UPC-E to UPC-A
Parameter # 0x25
Enable this parameter to convert UPC-E (zero suppressed) decoded data to UPC-A format
before transmission. After conversion, data follows UPC-A format and is affected by UPC-
A programming selections (e.g., Preamble, Check Digit).
Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E (zero suppressed)
decoded data.
Convert UPC-E to UPC-A
(Enable)
(0x01)
*Do Not Convert UPC-E to UPC-A
(Disable)
(0x00)