28
Convert UPC-E1 to UPC-A
Parameter # 0x26
Enable this parameter to convert UPC-E1 (zero suppressed) decoded data to UPC-A
format before transmission. After conversion, data follows UPC-A format and is affected by
UPC-A programming selections (e.g., Preamble, Check Digit).
Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E1 (zero suppressed)
decoded data.
Convert UPC-E1 to UPC-A
(Enable)
(0x01)
*Do Not Convert UPC-E1 to UPC-A
(Disable)
(0x00)
To Next Page
Loading...
