Socket SocketScan - Page 48

48
Set Lengths for Code 93 (continued)
Length Within Range - This option sets the unit to decode a code type within a
specified range. For example, to decode Code 93 symbols containing between 4 and
12 characters, first scan Code 93 Length Within Range, then scan 0, 4, 1 and 2 (single
digit numbers must always be preceded by a leading zero). Numeric bar codes begin on
page 82. To change the selection or cancel an incorrect entry, scan the Cancel bar code
on page 84
Code 93 - Length Within Range
Any Length - Scan this option to decode Code 93 symbols containing any number of
characters.
Code 93 - Any Length