Socket SocketScan - Page 51

51
Set Lengths for Interleaved 2 of 5 (continued)
Length Within Range - Select this option to decode only codes within a specified range.
For example, to decode I 2 of 5 symbols containing between 4 and 12 characters, first scan
I 2 of 5 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must always
be preceded by a leading zero). Numeric bar codes begin on page 82. To change the
selection or cancel an incorrect entry, scan the Cancel bar code on page 84.
I 2 of 5 - Length Within Range
Any Length - Scan this option to decode I 2 of 5 symbols containing any number of
characters.
Note: Selecting this option may lead to misdecodes for I 2 of 5 codes.
I 2 of 5 - Any Length