Need help?Do you have a question about the socomec ATyS M 3s and is the answer not in the manual?
Step-by-step guide for initial setup and commissioning of the ATYS UL 1008.
Overview of the ATYS transfer switching equipment and its key features.
Details on labels and markings for identifying the ATYS product and its components.
Details the environmental requirements for ATYS operation and storage, including IP rating and conditions.
Provides detailed physical dimensions for ATYS frames B4 and B5 (100A to 400A).
Illustrates the allowed and disallowed mounting orientations for the ATYS product.
Details on the specifications and dimensions of the ATYS mounting lugs.
Instructions for assembling optional accessories onto the ATYS unit.
Guide for installing bridging bars as an optional accessory for ATYS.
Instructions for mounting terminal covers, an optional accessory for ATYS.
Procedure for mounting additional auxiliary contacts for ATYS.
Guidance on connecting power terminals using lugs or busbars for ATYS.
Example wiring diagram for control circuits of a 400VAC ATYS system.
Explanation of ATYS input and output terminal functions and characteristics.
Details on how to perform manual transfer switching operations on the ATYS.
Instructions and safety considerations for padlocking the ATYS in the 'O' position.
Specifies the acceptable voltage limits and current requirements for ATYS power supply.
Description of the fixed inputs available on the ATYS motorisation module.
Details the fixed outputs (dry contacts) of the ATYS for signaling status.
Provides technical specifications for the ATYS fixed inputs.
Explains the impulse and contactor logic for controlling the ATYS in AUT mode.
Describes the product availability feedback output (contacts 63A-64A).
Provides technical specifications for the ATYS fixed outputs and auxiliary contacts.
Outlines key features of the ATYS range to aid in product selection.
To Next Page
General
