Need help?Do you have a question about the socomec ATyS 3S and is the answer not in the manual?
General| Rated Frequency | 50/60 Hz |
|---|---|
| Protection Degree | IP20 |
| Control Voltage | 24V DC, 230V AC |
| Control Type | Automatic |
| Operating Temperature | -25…+70 °C |
| Storage Temperature | -40…+85 °C |
| Humidity | 95% |
| Standards | IEC 60947-6-1, EN 60947-6-1 |
| Electrical Durability | 1000 cycles AC33B |
Overview of the ATyS 3s product range, its features, and benefits.
Details on product rating, model, and serial number for clear identification.
Environmental operating and storage conditions, including IP rating and altitude limits.
Technical drawings and detailed dimensions for ATYS 3s units across various ampere ratings.
Guidelines and diagrams for correct product mounting orientation of the ATYS 3s.
Instructions for installing accessories such as bridging bars on ATYS 3s.
Guidance on connecting power cables or bars to the ATYS 3s terminals, including cable sizes.
Wiring diagram and terminal descriptions for the ATYS 3s electrical control circuits.
Procedures for manual control and emergency operation of the ATYS 3s.
Explanation of control logic and electrical command types for ATYS 3s.
Steps to diagnose and resolve issues when the ATYS 3s does not function electrically.
Troubleshooting common problems encountered during manual switching of the ATYS 3s.
Diagnosing and fixing discrepancies between electrical commands and ATYS 3s operation.
Solutions for issues preventing the ATYS 3s from being padlocked.
References and part numbers for the ATYS 3s motorised, power, and control module.
References and part numbers for the ATYS 3s changeover switch unit.
Part number for the ATYS 3s mounting spacer accessory.
References and part numbers for the ATYS 3s handle support and manual operation handle.
To Next Page
