Need help?Do you have a question about the socomec ATyS p and is the answer not in the manual?
General| Control | Automatic |
|---|---|
| Standards | IEC 60947-6-1 |
| Rated Insulation Voltage Ui | 690 VAC |
| Rated Frequency | 50/60 Hz |
| Type | Automatic Transfer Switch |
| Number of Poles | 4P |
| Mounting | DIN rail mounting |
| Product function | Automatic source transfer |
| Rated Operational Voltage Ue | 400 V AC |
| Mechanical Durability | 10, 000 operations |
| Electrical Durability | 1, 000 operations at rated current |
| Protection Degree | IP20 |
Highlights the key features of the ATyS range of products.
Quick start guide for ATyS p models B3 to B5 (125A to 630A).
Quick start guide for ATyS p models B6 to B8 (2000A to 3200A).
Introduces the ATyS p product and labels its main parts.
Details the identification labels and electrical characteristics of the ATyS p.
Explains the ATS control module, its LEDs, and display screen functions.
Details the environmental requirements for the ATyS p product.
Specifies the IP rating for the ATyS p motorization control unit and power section.
Covers operating conditions such as temperature, humidity, and altitude.
Outlines storage conditions including temperature and duration.
Provides volume and shipping weight details for ATyS p by frame size and rating.
Lists the European directives and electromagnetic compatibility standards the ATyS p complies with.
States ATyS p compliance with the European directive for RoHS.
Confirms ATyS p's compliance with the 2002/96/CE directive.
Details ATyS p compliance with EMC standards, listing requirements.
Lists and describes various accessories available for the ATyS p.
Provides detailed product dimensions for ATyS p frames B3 to B5.
Detailed dimensions for ATyS p frames B3 to B5, covering various ratings and poles.
Detailed dimensions for ATyS p frames B6 & B7 (800A to 1600A).
Detailed dimensions for ATyS p frames B8 (2000A to 3200A).
Shows recommended mounting orientations for different ATyS p ranges.
Instructions for assembling customer-mounted accessories for ATyS p.
Details on terminal shrouds for ATyS p, covering mounting and installation.
Describes terminal screens for protection of terminals or connection parts.
Instructions for installing bridging bars on ATyS p switches.
Details copper bar connection kits for ATyS p Frame B8 (2000A-3200A).
Assembly instructions for incoming copper bar connection kits.
Assembly instructions for outgoing bridge connection assemblies.
Details the connection of external power supplies (400VAC - 230VAC) for ATyS p.
Information on raised mounting spacers for ATyS p frames B3, B4 and B5.
Describes padlocking key interlocks for electrical and backup control in position 0.
Information on fitting additional auxiliary contacts for ATyS p.
Instructions for installing optional modules like RS485, Ethernet, I/O, etc.
Details power circuit connections, including cable/bar connections and terminals.
Explains how to make cable or bar connections for ATyS p power circuits.
Details the power connection terminals used in ATyS p.
Specifies recommended cable cross-sections for ATyS p power connections.
Describes the standard connection for priority source supply on Switch I.
Details specific connection configurations for priority source supply on Switch II.
Outlines various network and power connection possibilities for ATyS p.
Lists and illustrates different types of networks supported by ATyS p.
Provides details on metering and sensing configurations for ATyS p.
Explains the control circuit wiring for ATyS p.
Shows typical wiring diagrams for ATyS p control circuits.
Wiring details for ATyS p motorisation and ATS control modules.
Wiring diagram for the ATyS p motorisation module.
Wiring diagram for the ATyS p ATS control module.
Wiring connections for optional I/O modules in ATyS p.
Lists terminal denominations, descriptions, and characteristics for ATyS p.
Details the voltage sensing and power supply kit for ATyS p.
Describes the standard configuration possibilities for the sensing and power supply kit.
Installation steps for the sensing and power supply kit in a 4-wire configuration.
Wiring diagrams for sensing kits, covering standard and specific configurations.
Specific wiring diagrams for sensing kits, detailing network and supply wiring.
Details how to operate the ATyS p in manual mode.
Instructions for performing emergency manual operation of the ATyS p.
Information on padlocking the ATyS p in various positions.
Covers electrical operations of the ATyS p, including dual power supply and voltage sensing.
Details the dual power supply connections for the ATyS p.
Explains the voltage sensing inputs for ATyS p, including network configurations.
Describes the fixed inputs on the ATyS p motorisation module.
Provides descriptions for each fixed input and their functions.
Explains the remote control logic options for ATyS p.
Details the configuration of programmable inputs for ATyS p.
Describes the fixed outputs (dry contacts) on the ATyS p.
Explains the product available output function for the ATyS p motorisation module.
Details the configuration of programmable dry contact outputs for ATyS p.
Step-by-step guide for programming the ATyS p using the Easy Config software.
Instructions for downloading and installing the Easy Config software.
Guide to programming the ATyS p directly using its keypad.
Overview of the ATyS p LCD display and its information presentation.
Details how to navigate and visualize information on the ATyS p LCD display.
Describes manual/automatic modes and mains restoration conditions.
Explains the priority source loss sequence for Main-Generator applications.
Details the priority source loss and restoration sequence for Main-Main applications.
Describes the automatic restoration sequence for priority sources.
Outlines the priority source restoration sequence for Main-Generator applications.
Details the Test Off Load functionality and its activation.
Explains the Test On Load functionality for ATyS p.
Describes the engine exerciser function for periodic testing.
Provides general information on communication via RS485 connection.
Explains the MODBUS protocol used by ATyS p for communication.
Details characteristics according to IEC 60947-3 standard.
Lists rated operational currents according to IEC 60947-6-1.
Details terminal shrouds for protection against direct contact.
Describes terminal screens for protection of terminals or connection parts.
Information on bridging bars for power terminals on the top or bottom side of the switch.
Details copper bar connection kits for ATyS p.
Describes the solid neutral connection kit for ATyS p.
Information on the autotransformer for applications without neutral.
Details the DC power supply option for ATyS p.
Information on the voltage sensing and power supply kit.
Describes the voltage relay for monitoring ATyS p power supply.
Describes the door protective surround for ATyS p.
Information on additional auxiliary contacts for ATyS p.
Details mounting spacers for increasing terminal clearance.
Information on 3-position padlocking for ATyS p.
Describes the RONIS key interlocking system for ATyS p.
Information on current transformers for ATyS p.
Details optional plug-in modules for ATyS p communication and I/O.
Describes the remote interface for ATyS p, including D10 and D20.
Details the connection cable for the remote interface.
Describes the auto/manual key selector for ATyS p.
Spare electronic modules for ATyS d, t, g, and p.
Spare motorisation modules for ATyS r, d, t, g, and p.
Spare power sections for ATyS r, d, t, g, or p.
Introduces the main functional keys in the Easy Config software.
Steps for selecting the ATyS p product within the Easy Config software.
Describes the status and control screen in Easy Config software.
Details the setting screens within the Easy Config software for ATyS p configuration.
Configuration details for Setting Screen 1 in Easy Config software.
Explains the power management screen for setting ratings and load shedding.
Details the timers screens available in Easy Config software.
Configuration details for Timers Screen 1 in Easy Config software.
Configuration details for Timers Screen 2 in Easy Config software.
Details Timers Screen 3, available for Main-Gen applications.
Describes the input and output configuration screen in Easy Config software.
Configuration details for programmable inputs in Easy Config software.
Configuration details for programmable outputs in Easy Config software.
Explains the engine exerciser screen for scheduling tests.
Configuration details for the engine exerciser in Easy Config software.
Instructions on how to save configured settings in Easy Config software.
Describes the event recording screen in Easy Config software.
Details added functionality accessible by Super Users in Easy Config software.
Explains the control panel features for Super Users.
How to switch remote positions I-0-II via software for Super Users.
How to send remote command orders to the ATyS p via software.
How to remotely set and reset alarms and faults on the ATyS p.
How to remotely set the real-time clock of the ATyS p.
Using the reset screen for Super User added functionality in ATyS p.
Information about the software version displayed after product reset.
Details the operational modes accessible via the ATyS p keypad.
How to view measured values and parameter timers via the keypad.
Performing test sequences or electrical control of the position via keypad.
Parameter configuration and programming via the keypad.
General information and navigation for keypad programming.
Navigating the configuration screens via the ATyS p keypad.
How to modify parameters using the ATyS p keypad, with an example.
Navigating the setup menu using the ATyS p keypad.
How to perform a phase rotation check using the ATyS p keypad.
Navigating the voltage levels menu via the ATyS p keypad.
Navigating the frequency levels menu via the ATyS p keypad.
Navigating the power levels menu via the ATyS p keypad.
Navigating the timers menu via the ATyS p keypad.
Navigating the I/O menu using the ATyS p keypad.
Details on programmable inputs for ATyS p, including external options.
Explains the operation of the EON function based on timer settings.
Describes the programmable outputs available for ATyS p.
Explains the operation of load shedding before transfer.
Navigating the communication settings menu via the ATyS p keypad.
Navigating the date and time settings menu via the ATyS p keypad.
Lists metrology data affected by current and voltage transformers.
Details energy measurements for ATyS p.
Lists metrology data not affected by current and voltage transformers.
States of inputs and outputs for ATyS p.
Details network setting parameters for ATyS p.
Information on setting the hour and date for ATyS p.
Describes the Ethernet module interface for ATyS p.
Details the action system codes for ATyS p.
Lists the status codes and their descriptions for ATyS p.
Status of custom time ranges for the engine exerciser.
Measurement table for ATyS p, excluding CT/VT affected data.
Details energies and time meters for ATyS p.
Lists the states of various timers in the ATyS p.
Describes the state of optional modules installed on ATyS p.
Lists commands and their corresponding codes for ATyS p.
Lists user commands and their descriptions for ATyS p.
Instructions for setting timers for ATyS p.
Setting thresholds for upstream voltages in ATyS p.
Setting user power thresholds for ATyS p.
Configuring network settings for ATyS p.
Configuring input and output functions for ATyS p.
Details communication settings for ATyS p.
Details the product counters for ATyS p.
Configuration options for ATyS p outputs.
Status of input states for ATyS p.
Setup for pulse and 0/4-20mA option modules for ATyS p.
Setting custom time parameters for ATyS p.
Detailed information on events recorded by ATyS p.
To Next Page
