22
EN
5.3.
9
1112131419 17
1
2
3
4
7
load shedding output LSC active).
(Green when in position I).
(Green when in position II).
(Yellow when in position 0).
(Green when supply I voltage is within the set limits).
(Green when supply II voltage is within the set limits).
y
y
Switch the product from Auto to Manual and back to Auto to reset a fault condition).
The Product is Available to changeover).
(Yellow steady light when in Manual Mode).
Green steady light when in Auto mode with no timers running.
y
y
(Yellow steady light when in TON mode).
(Yellow steady light when in TOF mode).
To Next Page
Loading...
