socomec DIRIS A-40 - System Alarms; Setting Up Alarms

47EN
#(1(2 Ű 2.".,$"
10.2. System alarms
If an installation error is detected during setup, an alarm will be automatically generated.
Current/voltage compatibility
q Alarm upon connection error between the current and the voltage
q 1DPTHQDR@BDQS@HMKN@CKDUDKŰ/%@MC((M
,QFRUUHFWGLUHFWLRQRIURWDWLRQWKUHHSKDVHQHWZRUN
q  K@QLTONMHCDMSHjB@SHNMNESGDHMBNQQDBSCHQDBSHNMNEOG@RDQNS@SHNMENQDW@LOKDHMRSD@CNE
Faulty current sensor
q Alarm for detecting the absence of a current sensor
10.3. Setting up alarms
3GDHMRS@KK@SHNM@K@QLR@QD@TSNL@SHB@KKXCDSDBSDC@MC@K@QLRTONMDUDMSR@QDBNMjFTQDCVHSGSGD$@RX"NMjF
software.
There are several ways of identifying the presence of an alarm:
$/$50/('RQIURQW
q !KHMJHMF2XRSDL K@QL
q %HWDC K@QLTONMDUDMSS@JDROQHNQHSXHESGDQDHR@RXRSDL@K@QL@SSGDR@LDSHLD
$FWLYDWLRQRIDQRXWSXW
q If an output is present on the product, it can be activated when an alarm is detected