socomec Green Power 2.0 - COM2 SERIAL LINK DEFAULT SETTINGS; HOW TO CHANGE THE SERIAL LINK 2 SETTINGS

5. 5. com2 sEriaL Link dEfaULt sEttings
Baud rate: 9600 bauds
Parity: NONE
Data: 8 bits
Stop: 1 bit
Slave: 1
The serial link settings can be set from the control panel.
5. 6. How to cHangE tHE “sEriaL Link 2” sEttings ?
Available baud rate: 1200 - 2400 - 4800 - 9600 - 19200 bauds
Parity: EVEN - ODD - NONE
Slave number: 1 to 32
Please, see on the manual of the concerned UPS to see the correct localisation of the «com slot»
InstallatIon InsIde UPs
8
Delphys green power - Ref.:
IOMDGPJB0910-GB_11