EasyManua.ls Logo

socomec ITY3-TW020B - Page 39

socomec ITY3-TW020B
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ITYS 1-3 kVA - 551430A - SOCOMEC
39
EN
MODEL NAME
ITY3-
TW010B
ITY3-
TW010LB
ITY3-
TW020B
ITY3-
TW020LB
ITY3-
TW030B
ITY3-
TW030LB
Power rating VA/Watt 1000VA/1000W 2000VA/2000W 3000VA/3000W
Efficiency
Line mode 89% 93%
ECO mode 96% 97%
Input
performance
Voltage range 160-300V 100% load, 110-160V derating to 50% load linearly
Frequency range
Full range: 40Hz-70Hz
(1)
Normal mode: 45Hz-55Hz for 50Hz, 54Hz-66Hz for 60Hz
(1)
PF >0.99
THDI <5%
Output
performance
Rated voltage 200/208/220/230/240 VAC (derating 10% at 208V, derating 20% at 200V)
PF PF = 1
Voltage accuracy ±1%
THDv <1% linear load; <5% nonlinear load
Transfer time
(Typical)
0ms@ line <-> battery; 4ms @ line <-> bypass; 10ms @ ECO <->Inverter
Crest ratio 3:1
Overload
(Line mode)
100%<load≤105% continuous.
105%< load ≤125% for 5 minutes
125<load≤150% for 30 seconds.
>150% for 500ms.
Overload
(Battery mode)
100%<load≤105% continuous.
105%< load ≤125% for 2 minutes
125<load≤150% for 10 seconds.
>150% for 500ms.
Output
connection
Socket (IEC) 4 x IEC C13 8 x IEC C13
8 x IEC C13
1x IEC C19
8 x IEC C13
1x Terminal
Socket (Tower AU) 2 x AU 4 x AU + 1 x IEC C19
Battery
Voltage 36VDC 36VDC 72VDC 72VDC 72VDC 72VDC
Capacity (AH) 7Ah - 9Ah - 9Ah -
Maximum EBM quantity 4
Charger
Charging method Optimize battery management
Charging current 1.5A 8A 1.5A 8A 1.5A 8A
Recharging time 3h to 90% NA 3h to 90% NA 3h to 90% NA
Other mode CVCF Derating to 60%
Physical
performance
Dimensions
(W*D*H) MM
145*404*224 192*428*322
IP protection level IP20
Environment
Operating
temperature
0-45°C, 40-45°C load derating to 80%
and Max battery charger current 4A
Relative humidity 0-95%
Altitude 0~3000m (derating 1 % every up 100m @1000~3000m)
Acoustic noise <45dB at front 1m <50dB at front 1m
Certification EN IEC 62040-1 / EN IEC 62040-2 (C2 category) / AS 62040-1 / AS 62040-2
Performance EN IEC 62040-3
Manufacture ISO 9001:2015 / ISO 14001:2015
(1) In free running mode and in converter mode, UPS needs to be de-rated to 60% capacity (rated output power and maximum
charging current).

Related product manuals