EasyManua.ls Logo

socomec NETYS PE - User Manual

socomec NETYS PE
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
NETYS
INSTALLATION AND OPERATING MANUAL
NETYS PE
400-1400 VA

Table of Contents

Questions and Answers

  • A
    Andrew WilliamsAug 1, 2025
    What to do if socomec NETYS PE UPS works in battery mode when mains power is available?
    • J
      John SmithAug 1, 2025
      If your Socomec UPS is running on battery even when mains power is available, it could be due to a poor connection to the input mains. Check the connection of the cable to both the UPS and the mains outlet. Alternatively, the input protection might have been triggered. In this case, replace the input fuse with another of the same type or reset the automatic switch.
  • M
    Matthew Hubbard DVMAug 10, 2025
    Why is the backup time shorter than expected on my socomec NETYS PE UPS?
    • G
      Gloria CampbellAug 10, 2025
      A shorter than expected backup time on your Socomec UPS can be caused by a couple of things. First, the batteries may not be fully charged; leave them to charge for 8 hours consecutively. Second, the batteries might not be working correctly, in which case you should have them replaced by authorized personnel.
  • M
    Michael PrattAug 20, 2025
    What to do if socomec NETYS PE UPS stalls or goes into overload?
    • M
      Maria LeeAug 20, 2025
      If your Socomec UPS stalls or goes into overload, it's likely due to an overload on the load line. Check that the load applied doesn't exceed the maximum permitted, or reduce the power requirement of the load.

Summary

Certificate and Conditions of Warranty

Safety Standards

General Description

3.1 Introduction to NETYS PE UPS

Explains the UPS purpose, protection against disturbances, and its function.

Unpacking and Installation

4.1 Unpacking the UPS Unit

Instructions for removing the UPS and accessories from the packing case and keeping the original packaging.

4.2 Environmental Requirements for Installation

Guidelines for UPS placement, temperature, humidity, ventilation, and cable usage.

Front View

Front Panel Indicators and Alarms

Describes LED indicators for operating modes and acoustic alarms for different UPS states.

Rear View

Rear Panel Ports and Connections

Identifies and describes ports like RS232, USB, telephone, input, output, and fuse on the rear panel.

Connections

Connecting the UPS and Loads

Details how to connect the UPS to the mains and to the equipment to be powered.

Modes of Operation

8.1 Switching the UPS On

Procedure to turn the UPS on using the ON/OFF button.

8.2 Switching the UPS Off

Procedure to completely shut down the UPS using the ON/OFF button.

8.3 Normal Mode

Describes the operational state when mains power is available and stable.

8.4 Battery Mode

Explains the mode when mains power fails and the UPS uses battery power.

8.5 Overload

Details what happens when the UPS is subjected to excessive load.

Communication

9.1 Communication Solutions

Mentions Uni Vision management software for local shutdown of Windows/Linux systems.

9.2 RS232;USB Interface

Explains communication via RS232/USB for monitoring and shutdown procedures.

Remedies for Minor Problems

Technical Specifications

socomec NETYS PE Specifications

General IconGeneral
Brandsocomec
ModelNETYS PE
CategoryUPS
LanguageEnglish

Related product manuals