socomec NETYS PE - Technical Specifications

NETYS PE
400-1400 VA
ITALIANOENGLISH
18 IOMNETPEXX00-GB_02
11
TECHNICAL SPECIFICATIONS
Electrical specications - Input
PE 400 PE 600 PE 800 PE 1000 PE 1400
Mains voltage 170-280 V
Frequency (nominal) 50/60 Hz with automatic selection
Mains connection IEC320 socket
Electrical specications - Output
PE 400 PE 600 PE 800 PE 1000 PE 1400
Voltage (Normal Mode with AVR) The AVR increases (boosts) the output voltage by 18%
when the input voltage drops below 90% of the nominal value.
The AVR decreases (bucks) the output voltage by 15%
when the input voltage rises above 110% of the nominal value.
Voltage (in Battery Mode) 230 V ±10%
Frequency 50/60 Hz
Wave form Stepwave
Transfer time 2÷6 milliseconds (typical)
Protection Overload, deep discharge and short circuit
Load connection socket IEC320 3 (C13) 3 (C13) 3 (C13) 4 (C13) 4 (C13)
Models
PE 400 PE 600 PE 800 PE 1000 PE 1400
Power (VA) 400 600 800 1000 1400
Power (W) 240 360 480 600 840
Technology Line Interactive Step Wave with AVR voltage stabilizer
Battery
PE 400 PE 600 PE 800 PE 1000 PE 1400
Typical back-up time (PC+15” LCD monitor) 8 min 15 min 20 min 45 min 55 min
Battery recharge Under permanent charge even when the UPS is o (mains present)
Mechanical characteristics
PE 400 PE 600 PE 800 PE 1000 PE 1400
Dimensions (WxDxH mm) 99x334x143 99x334x143 140x370x180 140x370x180 140x370x180
Net weight (kg) 5.0 6.1 6.6 13.6 14.6
Reporting and Communication
PE 400 PE 600 PE 800 PE 1000 PE 1400
Communication interface - RS232/USB RS232/USB RS232/USB RS232/USB
Local communication software - UPS Management software – Windows™ & Linux (free download)
Telephone protection - Telephone line/modem/ADSL suppressor: RJ11
Environment
PE 400 PE 600 PE 800 PE 1000 PE 1400
Noise level at 1 meter <45 dBA
Temperature 0÷35 °C (15÷25 °C for optimum battery life)
Environment Altitude: 2000 m, humidity: 90% non-condensing
Reference standards EN62040-1-2 (EMC), EN62040-1-1 (safety)