To Next PageTo Next Page
Need help?Do you have a question about the socomec NRT2-U1100 and is the answer not in the manual?
General| Product Type | UPS |
|---|---|
| Frequency | 50/60 Hz |
| Operating Temperature | 0-40°C |
| Storage Temperature | -15-45°C |
| Humidity | 0-95% non-condensing |
| Input Voltage | 230 V |
| Output Voltage | 230 V ± 5% |
| Battery Type | Sealed lead-acid (SLA) |
| Typical Backup Time at Full Load | 5 minutes |
| Communication Interface | USB |
| Protection | Overload, short circuit |
| Standards | EN 62040-1, EN 62040-2 |
| Technology | Line Interactive |
| Power Rating | 1100 VA |
General safety warnings and precautions for using the UPS.
Explanation of safety symbols and labels found on the equipment.
Specifies environmental conditions for placing the UPS unit.
Details on power supply, grounding, and circuit breaker requirements.
Step-by-step instructions for setting up the UPS vertically.
Instructions for mounting the UPS unit in a standard equipment rack.
Critical safety precautions before connecting external battery modules.
Step-by-step guide for attaching external battery units to the UPS.
Instructions for recharging the internal UPS batteries.
Steps to start up and shut down the UPS system safely.
How to perform a diagnostic test on the UPS battery.
Explains various visual and audible signals for UPS status and errors.
Guide on how to navigate to and enter the UPS configuration menu.
Details on various user-configurable settings like voltage, frequency, and overload.
Summary of available communication options for UPS monitoring and control.
Information on connecting and using the UPS via the USB port.
Information on connecting and using the UPS via the RS232 serial port.
Information on the EPO function for emergency shutdown.
Description of optional Web/SNMP cards for network connectivity.
Explanation of the relay interface for remote status monitoring.
Solutions for common UPS problems, error codes, and alarms.
