Precautions
Before using the product, please read carefully the safety
measures below and strictly adhere to them when using the product.
Violation of these rules may cause malfunction or cause total failure of the
product. The manufacturer’s guarantee will be void if the safety measures
stated below are violated.
•
Protect the product from shock and other mechanical impacts that can
damage it.
•
Do not use the product in conditions of high humidity, under or in contact
with water: the product is not waterproof.
•
Do not leave the product in places with intensive sun light or high tempera-
tures for a long time, this can cause electrolyte leakage from power elements,
failure of the product, and injuries.
•
Do not leave the product for a long time near devices that generate strong
magnetic fields, such as magnets or electric motors, and where strong
electrical magnetic signals are generated, such as transmitter towers.
•
Do not perform measurements close to cell phones and microwaves, this
may affect the instrument’s readings.
•
Do not disassemble and do not try to repair the device on your own.
•
Do not connect the device to a PC or socket while it has regular batteries
installed.
•
Strictly observe polarity when you install power elements, otherwise the
device may overheat and fail.
To Next Page
Loading...
Need help?
General
