Individual Settings
Before making any measurements it is recommended to
customize the settings of your device.
●
Time/alarm clock
●
Date/Time - set the current date and time before using the
device. This is necessary to save the measurement history, display current
time and use the «Alarm Clock» function. Date and time are not reset even
when the batteries have been removed.
●
Alarm clock - check this option to activate the «Alarm Clock»
function and set the time. The alarm clock will go off even if the device is
turned off. If the sound has been turned off, only the color indication of the
clock will appear. You can switch the signal off pressing any button.
Elements of the «Settings» menu
●
Language
This item allows you to choose the display language.
●
Radioactivity
Choose the necessary threshold from 16 preset values on the list.
When the preset background radiation
threshold is exceeded, an intermittent sound alarm is
activated and the bars on the graphs turn yellow and
red depending on how seriously the threshold is
exceeded
You can switch the sound alarm off in:
«Settings» - «Sound» - «Threshold»
To Next Page
Loading...