●
Radiation dose
Choose the necessary threshold from 15 preset values on the list.
When the preset accumulated dose threshold is
exceeded the sound alarm is activated.
●
Sound
the device.
You can set the sound parameters in this menu item.
●
Enable - uncheck this option to turn off all possible sounds on
●
Volume - set the volume for all possible sounds on the device
on the scale from 1 to 5.
●
Ton - choose one of three tones for all possible sounds on
the device.
●
Buttons - uncheck this option to turn off the signal when
buttons are pressed.
●
Sensor - uncheck this option to turn off the signal when
detectors register radioactive particles.
●
Threshold- uncheck this option to turn off the sound alarm
when the preset background radiation thresholds are exceeded.
To save power and increase battery life we recommend that you
turn off the sound.
To Next Page
Loading...
