Need help?Do you have a question about the Sofar solar 2200TL-G3 and is the answer not in the manual?
General| Model | 2200TL-G3 |
|---|---|
| Rated Output Power | 2200 W |
| Start Voltage | 150V |
| Number of MPP Trackers | 1 |
| Max. Input Current per MPPT | 12A |
| Max. AC Power | 2200 W |
| Max. AC Current | 10 A |
| Rated AC Voltage | 230 V |
| AC Voltage Range | 180 V - 280 V |
| Rated Frequency | 50 Hz / 60 Hz |
| THDi | <3% |
| Power Factor | >0.99 (at rated power) |
| DC Switch | Yes |
| Protection Degree | IP65 |
| Cooling | Natural Convection |
| Max. Input Current | 12A |
| Type | Grid-Tied Inverter |
| Operating Temperature Range | -25°C to +60°C |
Provides essential safety instructions for installation and operation.
Introduces safety symbols used on the inverter.
Specifies the qualifications required for personnel handling the inverter.
Outlines the necessary conditions and location for inverter installation.
Details how to safely transport the inverter equipment.
Safety precautions for performing maintenance and repair on the inverter.
Addresses safety concerns related to electromagnetic compatibility and noise.
Detailed explanation of symbols found on the inverter for safety.
Details the physical dimensions of the SOFAR 1.1K~3.3KTL-G3 inverters.
Explains the operational functions and internal modules of the inverter.
Presents the efficiency performance curves of the inverter.
Describes important labels and their locations on the inverter unit.
Important safety notes and warnings before commencing installation.
A flowchart detailing the steps for inverter installation.
Procedures for checking packing materials and deliverables before installation.
A general description and overview of the SOFAR inverter's components.
Lists the necessary tools for performing the inverter installation.
Guidelines for selecting the optimal and safe location for mounting the inverter.
Instructions on how to safely handle and move the inverter unit.
Step-by-step instructions for physically mounting the inverter onto a surface.
Safety notes and prerequisites before making electrical connections.
Procedure for connecting the grounding cables to the inverter.
Step-by-step guide for connecting DC input power cables.
Instructions for connecting AC output power cables.
Connect RS485, CT, and logic interface cables for communication.
Procedure for installing the optional WIFI/GPRS module.
How to establish communication via RS485 and Wi-Fi.
Ensures all safety checks are completed before starting the inverter.
Procedures for safely starting the inverter and confirming its operation.
Describes the buttons, indicator lights, and display panel.
Illustrates typical display screens during normal operation.
Explains operating states and how faults are displayed.
Guides navigation through menus and sub-menus.
Step-by-step instructions for updating inverter software via USB.
Information and procedures for identifying and solving inverter problems.
Details common events, their descriptions, and corresponding solutions.
Recommendations for routine maintenance to ensure long-term inverter operation.
Lists the technical specifications for DC input parameters of the inverters.
Details the technical specifications for AC output parameters of the inverters.
Covers inverter efficiency, protection features, and communication standards.
Provides general technical data and characteristics of the inverters.
Details the duration and calculation methods for the standard inverter warranty.
Information on purchasing and terms of extended warranty for the inverters.
Lists conditions and reasons for which warranty coverage may be invalidated.
A statement regarding consumer rights and guarantees under Australian law.
To Next Page
