Sofar solar SOFAR 25KTLX-G3 - Page 61

SOFAR 25~50KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
- 57 -
↓
Short press the“∨”
81<.S1 threshold 49.5Hz
100ms
↓
Short press the“∨”
81<.S1 50.0Hz 105ms
↓
Short press the“
∨
”
81<.S2 threshold 47.5Hz
100ms
↓
Short press the“
∨
”
81<.S2 50.1Hz 107ms
16. Autotest STD
16.Autotest STD
Long press the “∨”
The test procedure is same as Autotest Fast, but it’s much more time
consuming.
（B）Event List：
Event List is used to display the real-time event records, including the total number
of events and each specific ID No. and happening time. User can enter Event List
interface through main interface to check details of real-time event records, Event
will be listed by the happening time, and recent events will be listed in the front.
Please refer to below picture. Long press the button and short press the button to
turn the page in standard interface, then enter into “2. Event List” interface.
2. Event List
1. Current event
2. History event
Fault information
001 ID04 06150825
(Display the event sequence number, event ID
number, and event occurrence time)
(A) “SystemInfo” Interface as below
3.SystemInfo
------Long press DOWN button
1.Inverter Type
2.Serial Number
3.Soft Version
4.Hard Version
5.Country