Sofar 1100TL - Electric Connection

SOFAR 1.1K~3KTL User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 3 -
SOFARSOLAR Co.Ltd for help if necessary.
Transport of the equipment, especially by road, must be carried out with by suitable
ways and means for protecting the components (in particular, the electronic
components) from violent shocks, humidity, vibration, etc.
Electric connection
Please comply with all the current electrical regulations about accident
prevention in dealing with the solar invert.
Before the electrical connection, make sure to use opaque material
to cover the PV modules or to disconnect PV array DC switch.
Exposure to the sun, PV array will produce a dangerous voltage!
Danger
All installation accomplished only by professional electrical
engineer!
 must be trained;
 Completely read the manual operation and understand
relevant matter.
Warning
Get permission from the local electrical gird operator, complete all
electrical connections by professional electrical engineer, then
connect inverter to electrical grid.
Attention
It’s forbidden to remove the tamper evident label, or open the
inverter. Otherwise Sofarsolar will not provide warranty or
maintenance!
Note
Operation
Touching the electrical grid or the terminal of the equipment may
lead to electrocution or fire!

Don’t touch the terminal or conductor connected to the
electrical grid.
 Pay attention to any instructions or safety documents related
to grid connection.
Danger
Some internal components will be very hot when inverter is
working. Please wear protective gloves!
Attention
Maintenance and repair