Troubleshooting and Maintenance
Disassembling the sealed head can damage the flashlight and void the warranty.
Sofirn Ltd. recommends using high-quality brand batteries. Damage by battery leakage
voids the warranty.
Remove the battery if the flashlight will not be used for an extended period of time.
To prevent self-discharge or accidental activation during storage or transportation,
unscrew the tailcap by half a turn or remove the battery.
Every 6 months threads should be wiped with a clean cloth followed by a thin layer of
silicone grease.
To maintain a proper level of waterproofness, replace worn-out o-rings with an
approved spare.
Troubleshooting: Clean battery contacts regularly as dirty contacts may impair the
performance of the flashlight. If you experience problems (flicker, shine intermittently
or failure turn on) the following root causes and solutions should be tried:
Reason A: The battery needs a replacement.
Solution: Replace the battery with an approved type of a fully charged battery.
Reason B: Threads, PCB board contact or other contacts are dirty.
Solutions: Please clean the contact points with a cotton swab soaked in rubbing alcohol.
Reason C: The flashlight will not turn on upon first use.
Solution: Please do not forget to remove the insulation sticker from the battery on first
use.
If the above methods do not work please refer to the warranty policy before contacting
your authorized distributor.
Sofirn Limited:
Tel: +86-755-23440047 Fax: +86-755-23440141
Web: www.sofirnlight.com
E-mail: us@sofirnlight.com eu@sofirnlight.com wholesale@sofirn.cn
Please contact us if you have any questions.
If your product is defective please contact us for replacement within warranty period.
Manufacturer: Shenzhenshi Jinba Technology Co.,Ltd
Address: 1/F to 9/F, 1st Building, NO.110 Tenglong Industrial Center, Guanlan Street,
Longhua New District, Shenzhen 518000, China
To Previous Page
Loading...
