Sojet ELFIN ID - Chapter Four: How to Use the Printer and Check Work; 4.1 How to Use the Printer; 4.2 Check Work Before Use; 4.3 Check Work After Use

Chapter Four: How to Use the Printer and
the Check Work before/after Use
In this Chapter, you will learn how to use the printer, including check work before and after use.
4.1 How to Use the Printer
Sq #
Procedure
Instructions
1
cartridge
Installation
Insert cartridge into the printer stall by an angle of 15 degree, close cartridge clip
to secure. (see 2.3 Cartridge Installation)
Connect power adapter
2
Turn on
printer
to printer power input,
switch on power, printer
enters initialization
startup.
After initialization startup,
3
Main
Interface -
Printing
Management
“main interface” appears
(see Section 5.1).
Click to enter
“Printing Management” (see
Section 5.2).
4
Select data -
Start printing
Select a file on data list, click
to Start printing.
5
Printing
report
When printing starts, the
button change to the icon
for stop printing,
meanwhile a printing report
appears.
6
Stop printing
Click to stop
printing, printing report exits,
and the button returns to
“Start printing” status.
7
Switch off
Exit printing, and switch off power.
4.2 Check Work before Use
Sq #
Item
Check Work
1
Printer
support
Is the support securely mounted?
2
Printer
position
Is the printer orientation correct? Is the nozzle plate parallel to printing object? Is
the throw distance controlled within 0.5-2.5mm?
3
cartridge
Is the cartridge wiped clean? Has the cartridge been installed to printer?
4
Power input
Is the printer input voltage normal?
5
Printer status
Check status bar, is the equipment status normal?
4.3 Check Work after Use
Sq #
Item
Check Work
1
Printer
Power Status
Is the printer power switched off?
2
cartridge
Is the cartridge removed from printer and wiped clean and printhead capped?