Need help?Do you have a question about the Sokkia CX-102 and is the answer not in the manual?
General| Angle Accuracy | 2" |
|---|---|
| Distance Range Reflectorless | Up to 500 m |
| Internal Memory | 10, 000 points |
| Protection Class | IP66 |
| Communication | RS-232C, USB |
| Angle Measurement Accuracy | 2" |
| Distance Measurement Range (Non-prism) | Up to 500 m |
| Working Temperature Range | -20°C to +50°C |
| IP Rating | IP66 |
| Laser Pointer | Red laser |
| Angle Measurement Minimum Display | 1"/5" |
| Distance Measurement Accuracy (Prism) | +/- (2 + 2 ppm x D) mm |
| Distance Measurement Accuracy (Non-prism) | ±(3mm + 2ppm x D) |
Explains fundamental key operations, power management, and target switching for the instrument.
Details the various display screens and status indicators shown on the instrument.
Guides users through the process of centering the instrument using optical or laser plumming.
Provides step-by-step instructions for leveling the instrument using screen or plate level methods.
Details how to measure the included angle between two points by setting the horizontal angle to zero.
Explains how to perform simultaneous distance and angle measurements for accurate surveying.
Covers inputting essential station coordinates, instrument height, and azimuth angle before measurements.
Guides users on setting out points using coordinate data, calculating angles and distances for staking.
Explains how to modify various instrument settings and parameters via the Config Mode menu.
Details how to customize softkey allocations for efficient operation and application-specific workflows.
Provides instructions for checking and adjusting the plate level for accurate instrument setup.
Guides users through the procedure for checking and adjusting the laser plummet for accurate centering.
To Next Page
