Solace SIC3-RFK User Manual

INSTALLATION
GUIDE
MODEL
MODULE
DIAGNOSTICS
PROGRAMMING
solaceremotestarters.com
REV112316
SIC3-RFK
RED LED (FLASHING / ON)
1x / Sec. Power On
On Ignition On (Data / Analog)
WHITE LED (FLASHING)
1x Data communication from connected
device (after remote function or status from car).
2x - 4x Programming
DATA PROTOCOL SELECTION
1 Leave Ignition in OFF position
2 Press programming button (antenna button) 8x within 10 seconds (White LED on SIC3-RFK
flash 1x)
3 Choose your protocol below by pressing the programming button:
Option 2 - Press 2x - iData Telematics (Default)
Option 4 - Press 4x - iData / Fortin RF
Option 6 - Press 6x - D2D
Option 8 - Press 8x - Future Use
4 After 5 seconds White LED will flash according your selection.
REMOTE PROGRAMMING
1 Turn Igntion ON-OFF-ON (Analog Ignition connection may be required)
2 Press and hold the programming button (White LED will illuminate on SIC3-RFK)
3 After 3 Seconds the White LED will flash 1x. Release antenna button and press Lock on each
transmitter to be programmed. (White LED on SIC3-RFK flash 1x for each remote programmed)
4 Turn Ignition to OFF
(When using iData/Fortin RF protocol, the Solace remotes need to be programmed to bypass module. See
manufacturer's guide for details)
A
B
LED’S
C
D
CONNECTOR A (BLACK 4 PIN)
TO BYPASS MODULE OR REMOTE STARTER
TO SOLACE ANTENNA ( NOT INCLUDED )
GRAY / BLACK - START / STOP (-)
PINK - IGNITION INPUT (+)
WHITE / BLACK - TRUNK RELEASE (-)
RED - 12V INPUT (+)
BLACK - CHASSIS GROUND (-)
BLUE - UNLOCK (-)
GREEN - LOCK (-)
CONNECTOR B (WHITE 4 PIN)
CONNECTOR C (BLUE 5 PIN)
CONNECTOR D (WHITE 2 PIN)

Solace SIC3-RFK Specifications

General

Number of Buttons	5
Keyless Entry	Yes
Trunk Release	Yes
Panic Mode	Yes
Engine Start	Yes
Engine Stop	Yes
Door Lock/Unlock	Yes
Smartphone Control	No
Installation	Professional installation recommended
Operating Range	Up to 3000 feet
Compatibility	Most vehicles
Battery Life	Up to 1 year

Summary

Module Connections and Indicators

Module Connector Pinouts

Details of connectors A, B, C, and D with wire color codes.

LED Indicators

Explanation of LED behavior for status indication.

Module Diagnostics

Red LED Status

Interpretation of red LED flashing and solid states for diagnostics.

White LED Status

Meaning of white LED flashing patterns for communication.

Module Programming

Data Protocol Selection

Steps to select the correct data protocol for vehicle communication.

Remote Transmitter Programming

Guide to program remote transmitters to the SIC3-RFK module.

Bridgework and Resources

SIC3-RFK & Autoconnect Integration

Guidance on integrating SIC3-RFK with Autoconnect modules.

Additional Resources

Links to further installation and programming guides online.

Module Connections

Module Wiring Diagram

Diagram showing connections for SIC3-RFK & EVO-ONE with ignition data.

Module Programming Setup

SIC3-RFK Data Protocol to Option 4

Configure SIC3-RFK for iData / Fortin RF protocol using software.

Remote Programming

SIC3-RFK Remote Programming Steps

Step-by-step guide to program remotes to the SIC3-RFK module.

EVO-ALL Remote Programming

Instructions for programming remotes to the EVO-ALL unit.

Module Connections

Module Wiring Diagram

Diagram showing connections for SIC3-RFK & EVO-ALL with ignition data.

Module Programming Setup

SIC3-RFK Data Protocol to Option 4

Configure SIC3-RFK for iData / Fortin RF protocol using EVO-ALL.

Remote Programming

SIC3-RFK Remote Programming

Steps to program remotes to the SIC3-RFK module.

EVO-ALL Remote Programming Steps

Detailed guide for programming remotes to the EVO-ALL unit.

Module Connections

Module Wiring Diagram

Diagram showing connections for SIC3-RFK & iDATASTART HC.

Important Notes

Data Cable Modification

Instructions for modifying the SIC3-RFK cable for functionality.

Module Programming Setup

SIC3-RFK Data Protocol to Option 2

Configure SIC3-RFK for iDatastart Telematics protocol.

Remote Programming

SIC3-RFK Remote Programming

Guide to program remotes to the SIC3-RFK module.

Module Connections

Module Wiring Diagram

Diagram showing connections for SIC3-RFK & iDATASTART (BM & BZ).

Important Notes

Data Cable Modification

Instructions for modifying the SIC3-RFK cable for functionality.

Module Programming Setup

SIC3-RFK Data Protocol to Option 2

Configure SIC3-RFK for iData Telematics kit protocol.

Remote Programming

SIC3-RFK Remote Programming

Guide to program remotes to the SIC3-RFK module.

Module Connections

Module Wiring Diagram

Diagram showing connections for SIC3-RFK & iDATASTART (CLASSIC).

Important Notes

Data Cable Modification

Instructions for modifying the SIC3-RFK cable for functionality.

Module Programming Setup

SIC3-RFK Data Protocol to Option 2

Configure SIC3-RFK for Drone telematics kit protocol.

Remote Programming

SIC3-RFK Remote Programming

Guide to program remotes to the SIC3-RFK module.

Module Connections

Module Wiring Diagram

Diagram showing connections for SIC3-RFK & ADS-ALCA.

Module Programming Setup

SIC3-RFK Data Protocol to Option 2

Configure SIC3-RFK for iData Telematics protocol.

Remote Programming

SIC3-RFK Remote Programming

Guide to program remotes to the SIC3-RFK module.

Module Connections

Module Wiring Diagram

Diagram showing connections for SIC3-RFK & DEI (4X10/5X10).

Important Notes

Data Cable Modification

Instructions for modifying the SIC3-RFK cable for functionality.

Module Programming Setup

SIC3-RFK Data Protocol to Option 6

Configure SIC3-RFK for D2D protocol using XK Loader.

Remote Programming

SIC3-RFK Remote Programming

Guide to program remotes to the SIC3-RFK module.

Module Connections

Module Wiring Diagram

Diagram showing connections for SIC3-RFK & DEI (DBALL RSR FW.).

Important Notes

Data Cable Modification

Instructions for modifying the SIC3-RFK cable for functionality.

Module Programming Setup

SIC3-RFK Data Protocol to Option 6

Configure SIC3-RFK for D2D protocol using XK Loader.

Remote Programming

SIC3-RFK Remote Programming

Guide to program remotes to the SIC3-RFK module.